Topic: Minimum brightness and battery usage (C1)
In the control panel I can set the brightness for the day mode and the night mode. The values are stored in a range between 0 and 100. If I set a value below 10 then the display is completely dark. I expect this limit is identical for all C1 units.
In battery mode the brightness is automatically reduced by a factor of 2. This means if the value is set to 100 in power supply mode and I unplug the power cord, it is set to 50 afterwards. If the value is set to 15 then it is reduced to 7.5 and the display becomes dark. This is strange, I first thought there was a problem with my battery.
So I have 2 suggestions:
- Limit the values defined in the control panel, so the minimum is 10. (Settings below 10 don't make sense).
- Change the code for entering battery mode so that the brightness doesn't get values below 10.