You are not logged in. Please login or register.
chumbysphere forum → Chumby, the Device → My first Chumby One
Well after having amassed a small collection of Infocasts (three 8's and two 3.5's), I finally snagged a Chumby One on eBay... only problem is, it's missing its power supply. I saw in another thread that someone found a replacement on Amazon, but until I order that, can anyone tell me whether the Infocast 3.5's power supply can be interchanged (so I can test the C1)?
Looking forward to having an actual Chumby-branded device 
Insignia used a different manufacturer, but the power/voltage and physical connector are the same.
Cool, that's my concern -- physical connection, and volts+amps. I just noticed that the BB3.5 adapter is only 2A, whereas the BB8 is 2.5A... so probably a good thing that the connectors are incompatible between the two 
You can usually use a higher amperage power supply as long as the voltage is the same. The current rating is the maximum the supply can provide, not a minimum.
Yes, I'm aware of this... but using a Chumby One power supply on a Chumby 8 might be unhappy -- hence my comment 
chumbysphere forum → Chumby, the Device → My first Chumby One
Powered by PunBB, supported by Informer Technologies, Inc.
