• Registered: 2009-10-09
  • Posts: 3

Topic: Missing schematics

It seems that the old website for Chumby hardware information has gone away. So, would anyone here be able to provide me for the schematics for rev. 1.8 Ironforge? I can't seem to find them elsewhere, and they might be useful for a project I'm working on.

It is pitch black. You are likely to be eaten by a grue.
  • Duane
  • Duane
  • Blue Octy
  • Offline
  • From: San Diego, CA
  • Registered: 2006-08-24
  • Posts: 8,197

Re: Missing schematics

Here are the schematics/etc for the 3.7 Ironforge.

Duane's Website

  • Registered: 2009-10-09
  • Posts: 3

Re: Missing schematics

Thanks! It looks like that's not quite the right device revision, but it seems to be close enough for what I need.

It is pitch black. You are likely to be eaten by a grue.
  • Duane
  • Duane
  • Blue Octy
  • Offline
  • From: San Diego, CA
  • Registered: 2006-08-24
  • Posts: 8,197

Re: Missing schematics

The only real differences between the 3.7 and 3.8 devices is the screen brightness (three-level vs variable) and the display itself (different panel).

Duane's Website