Topic: Can boot CHB, but can't reach shell via serial port
Hello guys!
I bought CHB and got it shipped to me in Sweden a few weeks ago. My first goal was to get the serial port to works. I tried to follow the adafruit guide: http://www.ladyada.net/learn/chumby/serial.html, but the CHB seems to get stuck somewhere. I use a variable DC power supply 5V and current limited to 1.5 A at the moment. Below is the first and last few lines of output I get when rebooting the board. I've tried to press "any key" to enter shell, but nothing happends.
Loading SD image...
Reading 0x00000800 bytes from offset 0x0000b800 to destination 0x45a00000þ
Setting up LCD to point at 0x44844000
Reading 0x00000800 bytes from offset 0x0000b800 to destination 0x45a00000
Press any key to enter shell... 2
Press any key to enter shell... 1
............................................
MANY LINES REMOVED HERE
............................................
FATAL: Module snd_soc_stmp3780_devb not found.
[ 23.130000] Chumby timerx[2] driver version 3.0-Falconwing initializing (bunn
ie@chumby.com)... show me your jiffies!!!
[ 26.090000] input: stmp3xxx-rotdec as /devices/virtual/input/input2
[ 27.420000] NET: Registered protocol family 10
Starting chumbhowld service
Started chumbhowld
Adobe FlashLite 3.1.7 Release (Version 9,1,122,0)- Chumby Industries (version 9
build 112-3320 [GCC 4.3.2])
Portions copyright (C) 2005-2010 Chumby Industries, Inc.
Built for: falconwing; Features: Video ALSA ARM-optimizations
Build time: Wed 28Jul2010 1454
GetRegisteredInstancePid(/var/run/chumbyflashplayer.pid) returned 0 - no other i
nstance is running
rcS completed at Wed Dec 31 16:03:22 PST 1969
Anyone has an idea what the problem could be?
Another thing I find strange is that I get several "can't open /dev/tty0: No such file or directory" is this normal?
I would greatly appreciate any help. Thank you in advance!
Kind regards,
Magnus