Topic: Moving SD cards from FreeScale EVK
Hi,
I have developed an application running from SD card (2GB) using the FreeScale imx233 EVK Evaluation board. This app and SD boot works fine on this development board. I have reviewed the Hacker Board and it rather closely matched the Freescale design. Just for a test I'd like to see if the SD boots on a Hacker Board. I have a Chumby 1 here (used in my home) and so I thought I'd just try my SD in it as a quick test before buying the Hacker Board. I just wanted to see the Boot debug.
Here is what I found: The Chumby SD will not boot on the FreeScale EVK dev board.
http://www.freescale.com/webapp/sps/sit … e=IMX23EVK
Serial debug simply displays error code 0x8020a00f on power up. To me this indicates the Chumby SD is encrypted and ONLY can boot in a Chumby that has a the security fuses set for a KEY on the IMX23 to talk to the exact SD Boot that comes with the Chumby.
Could this be true?
Question. Does a real Chumby use the Imx233 internal security fuses to decode their SD at boot? More importantly, does anyone know if the Hacker Board has fuses are intact so I can try MY FreeScale SD Boot (not just the one that comes with the Hacker board)
Thanks all
newbie