1 Topic by stonechild (edited by stonechild 2010-12-06 12:27:10)

  • From: Freehold, NJ
  • Registered: 2010-11-28
  • Posts: 21

Topic: Mod Port only on the 3.5?

In bunnie's blog, he states that there is a “mod port” on the 3.5?.  Is it also on the 8" Infocast? And would the sensor package work on an Infocast?  FYI, the mod port is from  bunnie's blog "One small improvement to the 3.5? Infocast board is the addition of a “mod port” which breaks out several GPIOs, I2C, composite video, and a spare USB port to a 0.1? pitch header."

2 Reply by stonechild (edited by stonechild 2010-12-10 16:09:15)

  • From: Freehold, NJ
  • Registered: 2010-11-28
  • Posts: 21

Re: Mod Port only on the 3.5?

From bunnie's blog:

"bunnie says:
December 6, 2010 at 12:24 am
There’s a smaller version of the mod port on the 8" infocast."