1 (edited by demarks51 2019-07-23 06:53:46)

Topic: Infocast 8

Changed my mind and decided to keep this and buy a replacement power supply.

Owner of 7 Chumby type units. 3 Sony Dash, 2 Info 8, 2 Info 3.5, and 1 C1.

Re: Infocast 8

Power supply from eBay seller worked great. Info8 is back up and running.
Next project is C1 screen goes blank not black. Restart and it works for a while. Think it's ps starting to fail. Need inexpensive replacement.

Owner of 7 Chumby type units. 3 Sony Dash, 2 Info 8, 2 Info 3.5, and 1 C1.

Re: Infocast 8

Try replacing the SD card. That's what happened to one I bought on Ebay and new card with fresh firmware fixed it.

Owner of three Chumby One, an Insignia 3.5, and Sony Dash C10. A tinkerer at heart and IT manager by trade.

Re: Infocast 8

Funny thing is this C1 has been working great but every once in a while the screen goes pale blank. I push buttons including the on/off button and nothing changes. Unplug and then have to take out battery. Finally stops and then I plug it back in and it is okay for a while. Can't remember where to go to get files to flash on a new SD card. I did change out ps and so far so good.

Owner of 7 Chumby type units. 3 Sony Dash, 2 Info 8, 2 Info 3.5, and 1 C1.