Topic: Chumby os on Raspberry pi?

I'm just asking if anyone knows if Chumby os works with the Raspberry Pi
Or if there is a version out there that will work with Raspberry Pi.

Here are some of the specs

CPU   
ARM1176JZF-S (ARMv6k) 700 MHz

Memory   
256 MB (Model A)
256 MB (Model B rev 1)
512 MB (Model B rev 2, B+)

Storage   
SD card slot
(SD or SDHC card)

Graphics   
Broadcom VideoCore IV

Re: Chumby os on Raspberry pi?

The "chumby os" is just Linux, which already works on Raspberry Pi (my favorite version's Raspbian ). To run Chumby widgets, you'd need some form of Flash. The version that the devices use cannot be distributed, and Adobe doesn't release Flash for anything other than x86 platforms. Open-source alternatives like Gnash and Lightspark don't work too well, and are poorly optimized.

Re: Chumby os on Raspberry pi?

I would love to run the Chumby on such a box: http://shop.cyntech.co.uk/products/display-t-box

4 (edited by RIP 2023-06-22 17:46:26)

Re: Chumby os on Raspberry pi?

Looking for the source code?
The chumby device firmware incorporates a substantial amount of software licensed under the GNU General Public License version 2 (GPL2), GNU Lesser General Public License version 2.1 (LGPL2) and other licenses.

The source code for these software packages can be found here: (files.chumby.com/source/). This includes both third-party software and software generated by Chumby Industries.

files.chumby.com/source/


The pi should be able to boot from the linux builds here!