• Registered: 2010-12-04
  • Posts: 58

Topic: external video solder pads on Infocast 8"?

Does anyone know if there connection points for an external video connector on the Insignia 8" line there are for the 3.5"?

  • Duane
  • Duane
  • Blue Octy
  • Offline
  • From: San Diego, CA
  • Registered: 2006-08-24
  • Posts: 8,197

Re: external video solder pads on Infocast 8"?

No, the Insignia 8" is based on a completely different processor than the 3.5"

The iMX233 processor in the 3.5" device supports video in addition to LCD, which is why it's possible to simply add the connector.

Duane's Website

3 Reply by clay_shooter (edited by clay_shooter 2011-01-20 17:27:28)

  • Registered: 2010-12-04
  • Posts: 58

Re: external video solder pads on Infocast 8"?

Infocast 8" uses the  marvell pxa168