Re: Changing volume and/or Widgets
Alright, heyartlady, here is how you do it:
1)Start the SSH server on your Chumby, This is really easy, all you have to do is go into the control panel,
-Tap on Settings
-Tap on Chumby Info
-Tap on the Pi symbol in the upper right
-Tap on SSHD
2)If you are using Windows, you are going to need to download a program known as PuTTY. If you are using Mac OSX or Linux, you need to open up a terminal.
3)Go through the steps in step one until you are at the Chumby Info page, then make note of what the Chumby's IP Address is.
4)If in Windows, open up PuTTY, and where it says Host Name (or IP address), put in the Chumby's IP address and hit open (when asked who to sign in as, put in root).
-If in Linux or Mac OSX, then type sudo SSH (IP address of Chumby).
5)Cut and paste everything under the word Code in step 2 of Duane's guide, one line at a time, hitting enter after each command. Stop_control_panel and start_control_panel will give a lot of output. Don't worry, you haven't blown up your Chumby.
6)Enjoy!