Topic: Dash doesn't automatically reconnect to network after power outage

I have a pair of Sony Dashes running Chumby Software and when I loose power one of the Dashes automatically finds my wireless network and the other one gets stuck on the network discovery screen and I have to select a network and click next several times to get back to the clock. 

Is there a setting/button that I am missing that will get my second Dash to automatically log into the network?

Re: Dash doesn't automatically reconnect to network after power outage

It sounds like one is failing to set up the network as fast as the other one.  All else being equal, that's usually due to a weak signal.

Please physically swap the units to see if the problem is with the device or the location.

Re: Dash doesn't automatically reconnect to network after power outage

I have a Chumby 8 in my garage. The signal quality isn't great out there. Sometimes it will fail to auto-connect when it reboots. It does run fine once it is connected.

Tar, feathers, congress. Some assembly required.